Buy the GKD Pixel here: https://joeysrh.link/GGG_GKDPIXEL
Recommended Accessories
- MicroSD Card: 128GB or 256GB (with the platforms this plays, you would be safe with either of these options)
- MicroSD Card Reader: UGREEN SD Card Reader
- Charger: UGREEN 65W Charger (use the USB-A port for charging)
Preparation
Clone SD card: The SD cards that come with these devices are unbranded, low quality and prone to failure. The suggestion is to always replace them as soon as you receive the device. For instructions on how to clone your SD card, see here. I would highly suggest doing so before following this guide.
Stock Setup Guide
Adding ROMs & BIOS
Connect your SD card to your PC.
Head inside the roms folder, and you should see a bunch of folders for all of the systems that the device supports.
It should be pretty self explanatory at this point, but you want to move your ROMs for each system into the corresponding system folder.
For BIOS, head to the minira folder, and then retroarch. Inside of this folder is where you would put your BIOS files. Stock firmware does come with quite a bit already, so likely not necessary.
Custom Firmware Options
Custom firmware is a replacement for the stock firmware that we setup above. If you would like to try out any custom firmware, I would recommend using a separate brand new SD card and keep your stock one just in case you want to switch back.
